How to see who’s connected to your Wi-Fi
Who is connected to my Wi-Fi? The fastest answer is your router’s device list. Log in to the router, open the page called Connected Devices, Attached Devices or DHCP Clients, and read down it. Anything you don’t recognise deserves a closer look.
Who is connected to my Wi-Fi? Three ways to check
Start with the router, then count your own devices, then let software watch the network for you.
Check the router’s device list
Most routers answer at 192.168.1.1 or 192.168.0.1. The login is usually printed on a sticker on the router itself. Once you’re in, find the list of connected devices. Each entry has a name, an IP address and a hardware (MAC) address.
The catch is the names. Half the list will read something like “Espressif” or “HUAWEI-4F2A”, and the list only shows who is connected right now, not who was on at 2am.
Count your own devices first
Before you decide someone is stealing your Wi-Fi, count what you own. Phones, laptops, TVs, a games console, smart plugs, a printer, the kids’ tablets. The total is usually higher than people expect. CISA’s home network guide even counts Wi-Fi-enabled baby monitors and cameras among the devices on a typical home network.
To match names to devices, switch Wi-Fi off on one of yours, refresh the router list, and see which entry disappears. Repeat until only strangers are left.
Let software on your PC watch the network
A router gives you a snapshot. NetGuardian Pro watches continuously. It lists every device on your network with the maker and the kind of device where it can tell, such as a Samsung phone or a TP-Link router, and it alerts you when a new one joins. You can mark a device as trusted or block it from the app.
It runs on Windows 10 and 11, and it’s a one-time purchase rather than a subscription.
How to block someone from using your Wi-Fi
Blocking one device by its hardware address in the router doesn’t last. A device can present a random hardware address instead of its real one, and Microsoft explains how this works in Windows. What lasts is changing the Wi-Fi password.
- Log in to the router and set a new Wi-Fi password. Change the router’s own admin username and password while you’re there, since the FTC advises replacing the defaults.
- Check the encryption is WPA3 or WPA2. The FTC says WPA3 is the newer and better of the two, and that WPA and WEP are outdated.
- Turn off Wi-Fi Protected Setup (WPS) and remote management. The FTC lists both, along with UPnP, as router features that weaken security.
- Reconnect your own devices with the new password. Everyone else is out.
- Give visitors the guest network. CISA describes it as a way to let guests on with a separate password, so your main one stays private.
Check the router’s device list again an hour later, and keep the router’s software up to date.
How to stop it happening again
Set up an alert. A new device joining is the moment you want to know about, and a router won’t tell you unprompted. If an odd device makes you wonder whether something worse is going on, read Is my Wi-Fi hacked? for the signs that matter.
Sources
We opened each of these pages on 21 September 2026 to check what they say.
- FTC: How to secure your home Wi-Fi network: WPA3 and WPA2, changing default admin details, guest networks, turning off WPS and remote management
- CISA: Securing wireless networks: default passwords, guest access, keeping router software updated
- CISA: Home network security: the kinds of devices on a home network (archived 2021)
- Microsoft: Why use random hardware addresses: how Windows can present a random hardware address
If it isn’t for you, there’s a 7-day refund window.
About the author. Published by Joel Papenfus, founder of NetGuardian and creator of NetGuardian Pro. The sources this post draws on are linked in the post. Reviewed and checked by Joel on 1 October 2026.
When the unknown device is your child’s phone
Often the stranger on the list turns out to be a family device. If it is a child’s phone or tablet, you may want more than a name: a way to pause it at bedtime or find out where it is. NetGuardian can already block a device through a supported router (UniFi, OPNsense or pfSense) while you’re at home, and our Android app, Hawk Kids, works on any network. If you own NetGuardian Pro, your Pro licence key works in the app.
