NetGuardian Pro

Intrusion prevention system: hands on a keyboard at a desk with several monitors, Windows 10 and 11 guide

What is an intrusion prevention system? The alarm that rang while Dan slept

Dan runs a four-person architecture practice from the top floor of an old building. He’s careful about security, or thought he was. Two years ago he installed a monitoring tool on the office PC that holds the project files, and it has been emailing him alerts ever since.

On a Thursday in March it sent forty-one of them. The first arrived at 1:52 a.m. The last at 4:30. Each one said roughly the same thing: repeated login attempts on the file PC from an address overseas. Dan read them at 7:15 over coffee, forty-one warnings about something that had already finished happening while he slept.

Nothing got in that night. The password held. But sitting there scrolling through the alerts, Dan realised his security tool had done exactly what it was built to do. It noticed. It told him. Then it waited for a man who was asleep to do something about it.

What an intrusion prevention system does

Dan’s tool was an intrusion detection system. It watched network traffic, recognised a pattern that looked like an attack, and raised the alarm. That’s valuable, but it’s only half the job.

An intrusion prevention system does the same watching and then acts on what it sees. When the evidence is strong enough, it blocks the connection itself: the address gets cut off, the login attempts stop, and you find a note in the morning instead of forty-one alarms. NIST, the US standards body, treats the two as one family in its Guide to Intrusion Detection and Prevention Systems (SP 800-94). It calls them IDPS, and it covers host-based systems that run on a single computer alongside network-wide ones.

The easiest way to hold the difference in your head is the one Dan landed on. An intrusion detection system is a burglar alarm. An intrusion prevention system is a burglar alarm wired to a door that locks itself.

Isn’t that what the firewall is for?

That was Dan’s next question, and it’s a fair one. A firewall does block traffic. CISA describes firewalls as shielding your computer or network from malicious or unnecessary traffic, and recommends keeping your operating system’s own firewall switched on even if you have one in the router too.

The difference is what each one decides with. A firewall follows rules someone wrote in advance: allow this program, block that port. It has no opinion about the address that has now tried the same login 300 times. An intrusion prevention system watches behaviour over time, recognises that pattern, and adds a block that didn’t exist five minutes ago. CISA is also plain that a firewall alone doesn’t guarantee your computer won’t be attacked, and says to pair it with antivirus and good habits.

So the firewall stays. On Windows 10 and 11 that’s the Microsoft Defender Firewall, and it should read On in the Windows Security app. Here’s how to check that Windows Firewall is on. An intrusion prevention system works on top of it, not instead of it.

Does a small office or home need an intrusion prevention system?

Big companies have a security team watching alerts around the clock. Dan’s practice has Dan. That’s the real case for prevention in a small setting: nobody is awake at 1:52 a.m. to act on a warning.

Start with the basics, though. In the UK, the NCSC’s Cyber Essentials scheme sets out five controls as the minimum for organisations of any size: firewalls, secure configuration, security updates, user access control and malware protection. The NCSC notes that most attacks are basic in nature, which is why those five matter so much. If you run a US business, the same list is a sensible starting point. Our small business network security checklist walks through it for an office with a router and a few Windows PCs.

Intrusion prevention sits on top of those basics. It earns its place when a machine is reachable from outside, like Dan’s file PC, or when you want someone watching the connections at night.

What to look for in intrusion prevention software

Dan’s worry about prevention was the obvious one: what if it blocks something he needs? A tool that cuts off his cloud backup at midnight is worse than one that only warns. So he looked for four things.

  1. It blocks only when it’s sure. One odd connection shouldn’t trigger a block. A pattern that keeps building should.
  2. It explains itself in plain words. “Something at this address tried to log in 300 times” is useful. A rule number isn’t.
  3. Undoing a block is one click. If it gets one wrong, you should be able to fix it in seconds.
  4. It runs on the PC itself. A host-based system sees which program on the machine made each connection, which a router can’t.

Those four are why we built NetGuardian Pro the way we did. It watches every connection on a Windows 10 or 11 PC and scores each address as evidence builds up. When the score reaches critical, it blocks the address automatically through Windows Firewall, and it blocks port scans the moment they’re detected. Every block shows up with a plain explanation and an unblock button. If you want the detection side in more depth, read about intrusion detection system software, and see what a port scan is for the kind of probing that usually comes first.

A few weeks later

Dan changed two things after that morning. He replaced the file PC’s remote login password with a long passphrase, and he put an intrusion prevention system on the machine.

Then it happened again: the same kind of login attempts from a different address, just after two in the morning. This time Dan’s phone stayed quiet. In the morning there was one entry in the log saying the address had been blocked a few minutes after it started, and the reason why. He read it, checked the address meant nothing to him, and left the block in place.

If you think something may already have got through on your own machine, start with how to check if your wifi or PC has been hacked.

Sources

If it isn’t for you, there’s a 7-day refund window.